ProCRETE Premium Concrete Repair – Non-Sag
PROCRETE PREMIUM CONCRETE REPAIR is a NON-SAG, superior 2-component urethane patch for spall, step, curb and hole repairs. It has exceptional dimensional stability for large/deep repairs, vertical and sloped areas or heavy load bearing/high strength repairs. It creates a permanent patch for damaged concrete that will not crack, shrink, or lose its adhesion to the repaired concrete area – even after years of severe weather.
THE ONCE-AND-DONE FAST, PERMANENT SOLUTION!
- Urethane formula that will outlast the original concrete!
- 10X tougher than concrete!
- Made with the same urethane technology as specified by structural bridge, airport and highway engineers
- Deep patch repair – fill up to 10 feet
- Interior/exterior
- Easy to use – mix right inside the pouch
- Non-sag and moldable. Use for horizontal and vertical applications
- Remains intact and permanent through freeze/thaw and extreme heat cycles year-after-year! Tested up to 50 freeze/thaw cycles and still intact
- Drive over ready/return to service as soon as 2 hours
Description
INSTRUCTIONS
Read complete English and Spanish instructions HERE before beginning project.
DATA SHEETS
SAFETY DATA SHEET
SDS SHEET REQUESTS: To request an SDS, please use the below link and include the following information
- Product name and description.
- Product Sales Part Number or UPC (if available).
- Product color.
- Country of usage.
- Language desired.
SDS Request Email Link: sds@eclecticproducts.com
| TECHNICAL DATA SHEET | ||
| ProCRETE Premium Concrete Repair – Non-Sag | ||
FAQS
PLEASE READ AND FOLLOW ALL INSTRUCTIONS BEFORE STARTING.
What is the coverage for a 25.0 fl oz pouch (2 per box)?
SQUARE FOOT COVERAGE: .31 sq ft @ 1.0″ D / .62 sq ft @ .5″ D / 1.25 sq ft @ .25″ D.
LINEAR COVERAGE: 3.75 linear feet @ 1” W x 1” D / 7.5 linear feet @ 1” W x .5” D / 15.0 linear feet @ 1” W x .25” D.
Is ProCrete water resistant?
Yes
Is ProCrete chemical resistant and resistant to oil and grease?
Yes.
What color is ProCrete Premium Concrete Repair – NON-SAG?
Gray.
What is the working time?
15 – 20 min at 70 °F (from start of mixing).
What is the cure time/open to traffic
2 hours at 70 °F (minimum). Higher temperatures will speed up cure; lower temperatures slow down cure.
What is the ideal application temperature?
70 to 80 °F. High temperature greatly affect cure time and pouch heat. Ensure pouch is at room temperature (approximately 70 °F or cooler) BEFORE mixing.
How do I store ProCrete?
Store in clean, dry, cool, low-humidity and shaded environment between 50 to 90 °F.
What is the service temperature?
Fully cured product can withstand temperatures from -40 to 212 °F intermittently.
Is ProCrete freeze/thaw stable?
Yes. Tested up to 50 freeze/thaw cycles.
Is ProCrete paintable?
Yes. Oil-based paints recommended. Test first to ensure compatibility and adhesion.
What are clean-up instructions?
Tools can be cleaned with soap and water, wiping off uncured material, or scraping cured product. Wash skin with soap and water.
What types of applications would I use ProCrete Premium Concrete Repair – NON-SAG for?
HORIZONTAL & VERTICAL APPLICATIONS: Warehouse floors/sidewalks & steps, loading & shipping docs, parking garages & lots, basements, columns & statues, brick/stone walls, concrete benches & picnic tables, planters and MORE!
How do I avoid bubbling?
It is EXTREMELY important that the bottom of the surface to be repaired be cleaned out and completely dry. ProCRETE is sensitive to moisture and may bubble when curing if the area is not dry.
Do not spread the edges of the repair (feathering) any thinner than 1/8” to avoid any bubbling.
Reviews
There are no reviews yet.